Environmental certification: a scientific tool for sustainability. Evaluation of possible indicators for the environmental performance evaluation (EPE) of Ravenna province (Italy)

Environmental certification is becoming the main tool for application of sustainable development principles. The European Regulation Emas and the international standard ISO 14001 both require for certification, to perform an environmental management system to prevent environmental impacts and to continuously improve environmental performance. For a good environmental performance evaluation (EPE), certification needs to use scientific methodologies and to interface with scientific research; here we proposed emergy analysis as a valid method for EPE and emergetic environmental performance and condition indicators (EPIs, ECIs) to monitor a territorial system: Ravenna province (Italy). Together with emergy indicators were selected other indicators for a deeper EPE: emitted/adsorbed CO2, energy consumptions, air and water pollution measures. The paper showed that Ravenna system has a good environmental performance and demonstrated how different indicators from the most advanced chemical research (chemical-physical, analytical, etc.) contribute to a complete EPE of a complex territorial system and are useful for environmental certification and sustainable development.     

Heavy metals content in rain water collected in three different locations in Italy during 1999

Rain water samples collected at three different locations in Italy during 1999 were analysed for heavy metals determination. Results for V, Cr, Mn, Co, Cu, Cd, Sb, Pb, Al and Ni are reported in this paper. For most of the elements higher concentration values have been measured in the samples from Alpe Gera (rural site): only for Cd and V were the concentrations higher at Pisa. The total annual deposition (microg m(-2) y(-1)) shows a similar behaviour, with Alpe Gera being the location with highest total annual input for Cr, Mn, Co, and in particular for Cu, Sb, Pb and Al. The reason of the higher deposition at a rural site in comparison to a urban one (Milan) is not known: further experimental work and investigations are needed. Generally, no evident seasonal trends have been observed for the measured concentrations, while few correlations have been found among elements within the same station. Crustal contribution to total concentration varies from about 20% for V to less than 1% for Cu, Cd, Sb, Pb and Ni.     

Thermal behavior of holo- and hemicellulose obtained from rice straw and bagasse

Thermal gravimetric analysis, and differential thermal behavior of holo- and hemicelluloses obtained from rice straw and bagasse were investigated. Degradation was found to be of first order reaction. The activation energy values and the rate constants were calculated from the kinetic of weight loss. Hemicellulose was found to be less stable than holocellulose, and the stability of the samples was arranged in the order, rice straw holo- > bagasse holo- > rice straw hemi- > bagasse hemicellulose. Degradation of rice straw (holo- as well as hemicellulose) was performed via two exothermic processes, whereas bagasse hemicellulose combustion was completed through three exothermic processes. The magnitude and the shape of the exotherms depend, mainly, on the chemical composition of the sample.     

Second-order subdifferentials of C1,1 functions and optimality conditions

We present second-order subdifferentials of Clarke's type of C ^1,1 functions, defined in Banach spaces with separable duals. One of them is an extension of the generalized Hessian matrix of such functions in ⁿ , considered by J. B. H.-Urruty, J. J. Strodiot and V. H. Nguyen. Various properties of these subdifferentials are proved. Second-order optimality conditions (necessary, sufficient) for constrained minimization problems with C ^1,1 data are obtained.This work was partially supported by the National Foundation for Scientific Investigations in Bulgaria under contract No. MM-406/1994.     

Electrochemical behaviour of an indium electrode in concentrated KOH solutions at different temperatures

Summary The electrochemical behaviour of pure indium in KOH solutions (1–4M) was studied at different temperatures (25–70°C) by potentiostatic techniques. Two anodic peaks corresponding to the formation of In(OH)₃ and In₂O₃ were observed. The heights of the two peaks increased with the increase of alkali concentration. An increase of temperature increased the peak currents and shifted their corresponding potentials to more negative values. The variation of the peak currents and peak potentials with scan rate suggested that the anodic dissolution of indium was a diffusion controlled process. In cyclic voltammetry, the reverse scan consistently showed one peak which was attributed to the reduction of anodic oxidation products into indium. X-ray diffraction analysis confirmed the presence of In(OH)₃ at the first anodic peak, In(OH)₃ and In₂O₃ at the second anodic peak and In₂O₃ in the permanent passive region.

---

Zum elektrochemischen Verhalten einer Indium-Elektrode in konzentrierter Kalilauge bei verschiedenen Temperaturen

Zusammenfassung Es wurde das Verhalten von reinem Indium in 1 – 4M KOH-Lösungen bei Temperaturen zwischen 25 und 70°C mittels potentiostatischer Methoden untersucht. Zwei anodische Peaks, entsprechend der Bildung von In(OH)₃ und In₂O₃, traten auf. Die Höhe der beiden Peaks wurde mit zunehmender Alkalikonzentration gesteigert. Eine Temperaturerhöhung verstärkte die Peakströme und verschob die entsprechenden Potentiale zu negativeren Werten. Die Abhängigkeit der Peakströme und Peakpotentiale von der Scangeschwindigkeit legte den Schluß nahe, daß die anodische Lösung von Indium in einem diffusionskontrollierten Prozeß stattfindet. Bei der cyclischen Voltammetrie zeigte der reverse Scan einheitlich einen Peak, der der Reduktion der anodischen Oxidationsprodukte zu Indium zugeschrieben wurde. Röntgendiffraktionsanalyse bestätigte die Präsenz von In(OH)₃ beim ersten anodischen Peak, In(OH)₃ beim zweiten Peak und In₂O₃ im permanent passiven Bereich.

     

Radiation grafting from binary monomer mixtures. I. Vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol

Gamma-radiation grafting of vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol (VEEG) on polyethylene films has been studied from binary monomer mixtures. The effect of co-monomer composition and total exposure radiation dose on the grafting process is investigated. A combination of potentiometric and gravimetric techniques is applied to determine the grafting degree of each monomer in the final graft copolymer. The presence of more active monomer VEEG in the mixture was found to enhance the grafting of both monomers because the increasing of copolymerization rate which in turn increases the total grafting degree. The modification of the hydrophilic properties of the graft copolymer is studied by examining the grafted films for water- and copper (II) ions uptake.     

Studies on extraction of beryllium by di-(2-ethyl hexyl)-phosphoric acid from hydrochloric acid solutions

The distribution of Be between aqueous HCl solutions and organic phases of di-(2-ethyl hexyl)-phosphoric acid, has been described. The dependence of extraction on aqueous acidity, metal and extractant concentration as also on the diluent type, was thoroughly examined. The possible mechanism of extraction has been discussed in the light of results obtained.     

Interaction of long chain alkylammonium cations with reduced charge montmorillonite

Reduced charge montmorillonites (RCM) were prepared using lithium thermal treatment. The sorption of octylammonium (OA), dodecylammonium (DDA) and hexadecylammonium ions (HDA) on differently charged samples were studied. The amounts of DDA and HDA sorbed on each RCM exceed the cation exchange capacity (CEC) but that of OA exceeds only the CEC of samples with the lowest CEC. The sorption is affected not only by the layer charge but also by the formation of collapsed interlayer spaces in the lowest charged montmorillonites. X-ray measurements confirmed the decrease of the layer charge after lithium thermal treatment and the layer charge heterogeneity in RCMs.     

Conversion of sugarcane bagasse to carboxylic acids using a mixed culture of mesophilic microorganisms

Using the MixAlco process, biomass can be converted into carboxylic acids, which can be chemically converted into mixed alcohol fuels. This study focused on the use of countercurrent fermentation to anaerobically convert sugarcane bagasse and chicken manure to mixed carboxylic acids using a mixed culture of mesophilic microorganisms from terrestrial and marine sources. Bagasse was pretreated with lime to increase digestibility. The continuum particle distribution model (CPDM) simulated continuous fermentors based on data collected from batch experiments. This model saves considerable time in determining optimum operating conditions. For an 80% bagasse/20% chicken manure fermentation with terrestrial inoculum at a volatile solids loading rate (VSLR) of 7.36 g/(L of liquid·d) and a liquid residence time (LRT) of 8.88 d, total carboxylic acid productivity, total acid selectivity, and yield were 2.49 g/(L of liquid·d), 0.581 g of total acid/g of VS digested, and 0.338 g of total acid/g of VS fed, respectively, at a concentration of 18.7 g of total acid/L. At the same VSLR and LRT, fermentation with marine inoculum gave higher total acid productivity, total acid selectivity, and yield than fermentation with terrestrial inoculum. For an 80% bagasse/20% chicken manure fermentation with marine inoculum at a VSLR of 3.83 g/(L of liquid·d) and an LRT of 12.1 d, total carboxylic acid productivity, total acid selectivity, and yield were 1.38 g/(L of liquid·d), 0.667 g of total acid/g of VS digested, and 0.359 g of total acid/g of VS fed, respectively, at a concentration of 16.2 g of total acid/L.